PowerMaster Model RSG Slide Gate Operator. Designed for use in Residential, Commercial, Industrial and Restricted Access applications.

• PSC motor
• Timer to Close
• Master/Slave Operation
• Left/Right changeover in field
• NEMA 1 one-button control station

PowerMaster Model SG is available in single phase or three phase configuration.

This unit feature an onboard three button control station, timer to close, and an easy left/right changeover in the field. They also have a drive disconnect with brass slide for manual operation in case of power failure. The SG and D-SG are post or pad-mountable for easy installation.

The D-SG Model is available in a 115v single phase configuration only. The D-SG uses a DC motor with battery backup, soft start/soft stop, and an AC power outlet.

This unit features an on-board three button control station, timer to close, and an easy left/right changeover in the field. They also have a padlock-able drive disconnect with brass slide for manual operation in case of power failure. The SG and D-SG are post or pad-mountable for easy installation.

PowerMaster Model SGI Slide Gate Operator. Designed for use in Commercial, Industrial and Restricted Access applications.

• Timer to Close
• Master/Slave operation
• Left/Right changeover in field
• Padlockable drive disconnect for manual operation
• Pad mountable for a strong, solid installation
• Optional 18” riser

PowerMaster Model ASW Swing Gate Operator with DC motor. Controls vehicular gates in moderate traffic and residential applications. Ideal for custom homes, self storage, and other commercial properties.

• Battery Backup - up to 600 cycles on fully charged batteries when AC power is out
• 576 Watts (1/2 HP equivalent), 24 VDC Motor
• Soft start/Soft stop
• Single or Dual gate mode
• AC Power outlets
• Accepts plug-in loop detectors

PowerMaster Model MSW Swing Gate Operator. Designed for use on industrial vehicular swinging gates.

• PSC motor
• Timer to Close
• Master/Slave Operation
• Left/Right changeover in field
• NEMA 1 three-button control station
• Drive arm disconnects for manual operation

PowerMaster Model D-SW Swing Gate Operator with DC motor. Designed for use in high traffic areas.

• Battery Backup
• 576 Watts (1/2 HP equivalent), 24 VDC Motor
• Soft start/Soft stop
• Easy set limits
• AC Power outlets
• Accepts plug-in loop detectors
• Arm attachment height is 17 inches from operator base

PowerMaster Models CSWI is an industrial swing gate operator designed for use in high traffic applications. The CSWI is available in single phase or three phase configuration. Standard features include a battery backup, soft start/soft stop, and an AC power outlet.

Both versions of this unit have a timer to close, Master/Slave option, and left/right changeover in the field. The drive arm is also easily disconnected for manual operation.

PowerMaster Models D-SWI is an industrial swing gate operators designed for use in high traffic applications. The D-SWI Swing Gate Operator with DC motor is available in a 115v single phase configuration only. Standard features include a battery backup, soft start/soft stop, and an AC power outlet.

Both versions of this unit have a timer to close, Master/Slave option, and left/right changeover in the field. The drive arm is also easily disconnected for manual operation.

PowerMaster Model D-SBG Single Arm Barrier Gate Operator with DC motor.

• Weight may vary based on arm length.
• HORSEPOWER 1/2 HP equiv. MAX CYCLES 100 cPH POWER OPTIONS 115V
• TRAVEL SPEED (APPROX.) 90° in 4 Sec. BATTERY BACKUP yeS SHIPPING WEIGHT (APPROX.) 250 LBS* MAX ARM LENGTH 16 Ft liGHted arm option available
• Battery Backup - up to 200 cycles on fully charged batteries when AC power is out
• 576 Watts (1/2 HP equivalent), 24 VDC Motor
• Continuous duty operation
• Low battery shut down position selection (open/close)
• Accepts plug-in loop detectors

PowerMaster Model D-WBG Wishbone Arm Barrier Gate Operator with DC motor.

• Battery Backup - up to 200 cycles on fully charged batteries when AC power is out
• 576 Watts (1/2 HP equivalent), 24 VDC Motor
• Continuous duty operation
• Low battery shut down position selection (open/close)
• Accepts plug-in loop detectors